Customization: | Available |
---|---|
Application: | Enterprise Level |
Command System: | Vrp (Versatile Routing Platform) |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
02355FEA Network Switch CE9860-4C-EI 4 x 100GE QSFP28 Ports
Basic Information | |
Part Number | CE9860-4C-EI Switch |
Model | CE9860-4C-EI |
Description | CE9860-4C-EI Switch |
Table 4-298 lists the mappings between the CE9860-4C-EI and software versions.
Device Series |
Sub-series |
Device Model |
Short Name |
Supported Version |
---|---|---|---|---|
CE9800 |
CE9860 |
CE9860-4C-EI |
CE9860EI |
V200R020C00 and later versions |
The figures in this document are for reference only.
1 |
Ground screw |
2 |
SN and MAC address label |
3 |
Console port |
4 |
ETH management port (RJ45) |
5 |
USB 2.0 port |
6 |
Fan slot 1
Applicable fan modules:
|
7 |
Fan slot 2
Applicable fan modules:
|
8 |
Fan slot 3
Applicable fan modules:
|
9 |
Fan slot 4
Applicable fan modules:
|
10 |
Fan slot 5
Applicable fan modules:
|
11 |
Power supply slot 1
Applicable power modules:
|
12 |
Power supply slot 2 Applicable power modules:
|
13 |
Power supply slot 3
Applicable power modules:
|
14 |
Power supply slot 4
Applicable power modules:
|
15 |
Card slot 1 Applicable cards:
|
16 |
Card slot 2 Applicable cards:
|
17 |
Card slot 3 Applicable cards:
|
18 |
Card slot 4 Applicable cards:
|
19 |
Mounting brackets ![]() Cable management frames can be installed on the mounting brackets to route cables on the cards installed in the corresponding slots. |
- |
- |
Power Supply Slots
Each CloudEngine 9800 series switch has four power supply slots, in which pluggable power modules can be installed to provide power to the chassis. Install at least two power modules. Four power modules can provide higher reliability. If only two power modules are used, do not upgrade, downgrade, or replace them.
CloudEngine 9800 series switches support four power modules working in 2+2 backup mode.
If 1200 W AC&240 V DC power modules (PAC1K2S12) are installed on the switch and 110 V AC power input is provided to the power modules:
Fan Slots
Each CloudEngine 9800 series switch has five fan slots, in which pluggable fan modules can be installed to cool the chassis, ensuring efficient heat dissipation and system stability. A chassis must have five working fan modules to ensure normal operating.
All fan modules are hot swappable.
CloudEngine 9800 series switches use back-to-front airflow. Typically, cabinets in a data center have cold air flowing in from the front and hot air exhausted from the back. If a switch is installed with the port side facing the front and the power supply side facing the back, the switch needs to adopt fan modules and power modules with back-to-front airflow.
No. |
Indicator |
Name |
Color |
Status |
Description |
---|---|---|---|---|---|
1 |
SYS |
System status indicator |
Green |
Off |
The system is not running. |
Fast blinking |
The system is starting. |
||||
Slow blinking |
The system is running normally. |
||||
Red |
Steady on |
|
|||
2 |
MST |
Stack master/slave indicator |
- |
Steady on |
The CE9860-4C-EI does not support the stacking function. Therefore, this indicator is invalid. |
3 |
L/A |
ETH management port indicator |
Green |
Off |
No link is established on the port. |
Steady on |
A link is established on the port. |
||||
Blinking |
The port is sending or receiving data. |
||||
4 |
USB |
USB-based deployment indicator |
Green |
Off |
USB-based deployment is disabled (default state). |
Steady on |
USB-based deployment has been completed. |
||||
Blinking |
The system is reading data from a USB flash drive. |
||||
Red |
Steady on |
USB-based deployment has failed. |
|||
5 |
ID |
ID indicator |
Blue |
Off |
The ID indicator is not used (default state). |
Steady on |
The indicator identifies the switch to maintain. The ID indicator can be turned on or off remotely to help field engineers find the switch to maintain. |
Console Port
Attribute |
Description |
---|---|
Connector type |
RJ45 |
Standards compliance |
RS232 |
Working mode |
Duplex Universal Asynchronous Receiver/Transmitter (UART) |
Baud rate |
9600 bit/s to 115200 bit/s Default value: 9600 bit/s |
ETH Management Port (RJ45)
Attribute |
Description |
---|---|
Connector type |
RJ45 |
Standards compliance |
IEEE802.3ab |
Working mode |
Supported rate: 10/100/1000 Mbit/s auto-sensing Full-duplex |
Maximum transmission distance |
100 m |
USB Port
A USB flash drive can be connected to the USB port for log backup, system software backup and uploading, or USB-based deployment.
Table 4-302 lists technical specifications of the CE9860-4C-EI switch.
Item |
Description |
|
---|---|---|
Physical specifications |
|
|
Environment parameters |
Temperature |
|
Relative humidity |
5% RH to 95% RH, noncondensing |
|
Altitude |
< 5000 m (16404 ft.) |
|
Noise (sound pressure, 27°C) |
Back-to-front airflow: < 66 dBA |
|
Power specifications |
Power source type |
AC/High-voltage DC |
AC power input |
|
|
High-voltage DC power input |
|
|
Rated input current |
|
|
Chassis power consumption
|
Maximum power consumption |
Configured with four CE98-D32CQ cards: 1627 W (70% of the full fan speed at an ambient temperature of 40°C) Configured with four CE98-D8DQ cards: 1717 W (full fan speed at an ambient temperature of 40°C) |
Typical power consumption |
Fully configured with four CE98-D32CQ cards: 1231 W (50% throughput, short-distance QSFP28 optical modules on 64 ports and long-distance QSFP28 optical modules on another 64 ports, two power modules) Configured with four CE98-D8DQ cards: 1289 W (50% throughput, short-distance QSFPDD optical modules on 32 ports, two power modules) |
|
Static power consumption |
Configured with four CE98-D32CQ cards: 377 W Configured with four CE98-D8DQ cards: 548 W |
|
Chassis heat dissipation
|
Maximum heat dissipation |
Configured with four CE98-D32CQ cards: 5553 BTU/hour (70% of the full fan speed at an ambient temperature of 40°C) Configured with four CE98-D8DQ cards: 5861 BTU/hour (full fan speed at an ambient temperature of 40°C) |
Typical heat dissipation |
Fully configured with four CE98-D32CQ cards: 4202 BTU/hr (50% throughput, 64-port short-distance QSFP28 optical module and 64-port long-distance QSFP28 optical module, double power modules) Configured with four CE98-D8DQ cards: 4400 BTU/hr (50% throughput, short-distance QSFPDD optical modules on 32 ports, two power modules) |
|
Static heat dissipation |
Configured with four CE98-D32CQ cards: 1505 BTU/hour Configured with four CE98-D8DQ cards: 1871 BTU/hour |
|
Surge protection |
PAC1K2S12-B series power module:
PAC1K2S12-CB series power module:
|
|
Heat dissipation |
Heat dissipation mode |
Air cooling |
Airflow |
Back-to-front airflow: Air flows into the chassis from the port side and flows out from the power supply side. |
|
Reliability and availability |
Power module backup |
2+2 backup |
Fan module backup |
Five fan modules, working in 4+1 backup mode when the temperature is below 35°C |
|
Hot swap |
Supported by all power modules and fan modules |
|
Mean time between failures (MTBF) |
21.91 years |
|
Mean time to repair (MTTR) |
3.43 hours |
|
Availability |
0.9999934738 |
|
Technical specifications |
Processor |
2.2 GHz, 8-thread, four-core |
DRAM memory |
16 GB |
|
NOR Flash |
Two 32 MB flash memories |
|
SSD Flash |
64 GB |
|
Stack |
Service port supporting the stacking function |
Not supported |
Certification |
|
Ordering information is subject to change without notice in the case of product upgrades. Ordering information provided in this manual is for reference only. To obtain latest ordering information, contact HW switch distributors or local HW representative office.
Table 4-303 provides the ordering information.
Part Number |
Part Model |
Part Description |
---|---|---|
02352HQC |
CE9860-4C-EI |
CE9860-4C-EI mainframe (4*subcard slots, without fan and power modules) |
02352HQD |
CE9860-4C-EI-B |
CE9860-4C-EI mainframe (4*subcard slots, 4*AC power modules, 5*fan modules, port-side intake) |
1. Original Carton Package.
2. As your requirement.
Delivery:
1. 3-7 Working days after received the payment.
2. Shipment: Sea transportation & Air transportation ( DHL / UPS / TNT / FedEx / EMS )
1.Quality: All products from HW and new.
2.Reply on time: Your inquiry related to our products or price will be replied within 24 hours.
3.OEM&ODM: We can help you to design and put your good idea into products.
4.Warranty: 1-years warranty.
5.Technology support: On-site technical support, Telemaintenance, Free call and E-mail technology supports.
6.Training service support: Provide free training service on installation and debugging technology supports.
Kuanlu Information Technology Co., Ltd.(Kuanlu LTD) is a secondary operator in China, with 10 years of experience in data center operations. It provides services to over 200 data centers and secondary operators, and its end customers include many well-known internet companies such as Tencent and Wangsu.
Kuanlu is also a domestic telecommunications equipment and service provider, and a gold medal agent for multiple devices such as HW, ZT E, H3C, and Ruijie. It can deliver carrier level network hardware products at lower prices, and core network equipment inventory exceeding $5 million can deliver products within 72 hours.
The core team comes from manufacturers such as Hua wei and H3C, with technical staff certified by HCIE, HCNP, and other engineers. Most of them have more than 5 years of work experience and have a 7 * 24 hour fast response ability. They can provide users with planning, debugging, and emergency upgrade services.
The company has its own data transmission room and equipment maintenance factory, with a product database of over 300GB, focusing on data communication, transmission, wireless, server, storage, and security products. With no less than 1 year of after-sales tracking, it can provide users with remote and local installation services to ensure the stable
1.How can i get the price?
We usually quote within 24 hours after we get your inquiry (Except weekend and holidays). If you are very urgent to get the price, please email us or contact us in other ways so that we can offer you a quote.
2. Can I buy samples placing orders?
Yes. Please feel free to contact us.
3.What is your lead time?
It depends on the order quantity and the season you place the order. Usually we can ship within 7-15 days for small quantity, and about 30 days for large quantity.
4.What is yourpayment term?
-T/T, Western Union, Money Gram, and Paypal. This is negotiable.
5.What is the shipping method?
It could be shipped by sea, by air or by express (EMS,UPS,DHL,TNT,FEDEX and ect). Please confirm with us before placing orders.
6.How do you make our business long-term and good relationship?
a. We keep good quality and competitive price to ensure our customers benefit;
b. We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.