| Communication Mode: | Full-Duplex & Half-Duplex |
|---|---|
| Type: | Ethernet Switch |
| Transmission Rate: | 10/100/1000Mbps |
| Condition: | Brand-New |
| Console Port: | RJ45 |
| Part Number: | 02354fpt |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier
| Basic Information | |
| Part Number | 02354FPT |
| Model | CE8850-SAN |
| Description | CE8850-SAN switch (32*100GE QSFP28, 2*AC power modules, 6*fan modules, port-side exhaust) |
| Technical Specifications | |
| Other part numbers | 02354FPQ (CE8850-SAN switch (32*100GE QSFP28,without fan and power modules)) 02354FPS (CE8850-SAN switch (32*100GE QSFP28, 2*AC power modules, 6*fan modules, port-side intake)) |
| Installation Type | Cabinet Installation |
| Depth [mm] | 600 mm |
| Wide [mm] | 442 mm |
| Height [mm] | 43.6 mm |
| Weight with packaging | 13.4 kg (29.54 lb) |
| Weight without packaging | 9.1 kg (excluding optical modules, power modules, and fan modules) |
| Maximum power consumption [W] | - 32 x 200G + 8 x 400G: 1152 W (100% traffic load, 6.5 W 200G optical modules on all downlink ports, 12 W 400G optical modules on all uplink ports, high temperature of 40°C, dual power modules) - 32 x 100G + 8 x 400G: 973 W (100% traffic load, 5 W 100G optical modules on all downlink ports, 12 W 400G optical modules on all uplink ports, high temperature of 40°C, dual power modules) |
| Typical power consumption [W] | - 32x200G+8x400G: 590 W (50% traffic load, copper cables on all ports, normal temperature, dual power modules) - 32x100G+8x400G: 560 W (50% traffic load, copper cables on all ports, normal temperature, dual power modules); 693 W (50% traffic load, short-distance optical modules on all ports, normal temperature, dual power modules) |
| Static power consumption [W] | 455 W |
| Heat dissipation mode | Air cooling |
| Maximum heat dissipation [BTU/h] | - 32 x 200G + 8 x 400G: 3927 BTU/hour (100% traffic load, 6.5 W 200G optical modules on all downlink ports, 12 W 400G optical modules on all uplink ports, high temperature of 40°C, dual power modules) - 32 x 100G + 8 x 400G: 3323 BTU/hour (100% traffic load, 5 W 100G optical modules on all downlink ports, 12 W 400G optical modules on all uplink ports, high temperature of 40°C, dual power modules) |
| Typical heat dissipation [BTU/h] | - 32 x 200G + 8 x 400G: 2013 BTU/hour (50% traffic load, copper cables on all ports, normal temperature, dual power modules) - 32 x 100G + 8 x 400G: 1912 BTU/hour (50% traffic load, copper cables on all ports, normal temperature, dual power modules), 2363 BTU/hour (50% traffic load, short-distance optical modules on all ports, normal temperature, dual power modules) |
| Static heat dissipation [BTU/h] | 1757 BTU/hour |
| Power supply mode | AC,DC,HVDC |
| Rated input voltage [V] | - Rated input voltage range of 1200 W AC&240 V DC power modules: AC: 100 V AC to 240 V AC, 50/60 Hz; DC: 240 V DC - 1200 W DC power module: -48C DC: -48 V DC to -60 V DC; +48 V DC: +48 V DC |
| Input voltage range [V] | - 1200 W AC&240 V DC power module: AC: 90 V AC to 290 V AC, 45 Hz to 65 Hz; DC: 190 V DC to 290 V DC - 1200 W DC power module: -48 V DC: -38.4 V DC to -72 V DC; +48 V DC: +38.4 V DC to +60 V DC |
| Maximum input current [A] | 1200 W AC&240 V DC power modules: - 10 A (100 V AC to 130V AC) - 8 A (200 V AC to 240V AC) - 8 A (240 V DC) 1200 W DC power module: 38 A |
| Rated output power [W] | - 1200 W AC&240 V DC power module: 1200 W - 1200 W DC power module: 1200 W |
| Memory | DRAM: 8 GB |
| NOR Flash | 64 MB |
| NAND Flash | 4 GB |
| USB | It can be used for log backup and USB-based deployment. This function is reserved. |
| Console port | RJ45 |
| Downlink Service interface | 32*100GE QSFP28/32*200GE QSFP56 1. 100GE ports can be used as 40GE and 50GE (2 x 25GE) ports and cannot be split into 2 x 50GE ports. 2. A 100GE port can be split into 4 x 25GE, 4 x 10GE, or 2 x 50GE (2 x 25GE) ports. Two adjacent ports will be split at the same time. 3. 200GE ports can be used as 40GE and 100GE ports and can be split into 2 x 100GE (2 x 50GE for each 100GE port) ports. Note: 1. Supported optical modules: (1) In the case of port-side air intake, downlink 100GE/200GE ports support 100G-SR4/CWDM4/LR4/4WDM optical modules. (2) In the case of port-side air exhaust, downlink 100GE/200GE ports support 100G-SR4/CWDM4 optical modules. 2. Supported copper cables: When 200G ports are used, contact R&D engineers for interconnection verification before connecting to third-party devices. |
| Uplink Service interface | 8*400GE QSFP-DD 1. 400G ports can be used as 200GE, 100GE, and 40GE ports. 2. In V300R020C10, a 400GE port can be used as a 200GE/100GE/40GE port and can be split into 4 x 100GE (2 x 50GE, rather than 4 x 25GE) ports. Other port split modes, such as 2 x 200G/2 x 100G/2 x 40G/8 x 50G/8 x 25G/8 x 10G/4 x 50G/4 x 25G/4 x 10G, are not supported. In V300R021C10, a 400GE port can be dynamically split into 2 x 200GE ports. Currently, 2 x 200GE AOCs and 2.5 m copper cables can be used. Note: 1. Support for optical modules: (1) In the case of port-side air intake, uplink 400GE ports support 400G-SR8/DR4/FR4. When the ambient temperature ranges from 0°C to 35°C, 400G-LR8 is supported. However, the noise of the device exceeds the threshold at room temperature. (2) In the case of port-side air exhaust, uplink 400GE ports support 400G-SR8. However, the noise of the device exceeds the threshold at room temperature. 2. Support for copper cables: V300R021C10 and later versions: 40G/100G/200G/400G copper cables are supported. A 400GE port can be dynamically split into 2 x 200GE ports. 2.5 m copper cables can be used. When 200G and 400G ports are used, contact R&D engineers for interconnection verification before connecting to third-party devices. V300R020C10 and V300R021C00: 40G/100G/200G/400G copper cables are supported. After uplink ports are split, copper cables are not supported. When 200G and 400G ports are used, contact R&D engineers for interconnection verification before connecting to third-party devices. |
| Service port supporting the stack function | Reserved function. This function is not enabled. |
| RTC | Supported |
| Redundant fans | The device supports 5+1 backup of fan modules that work in hot standby mode. If a single fan module fails, the device can work properly in a short period of time. To guarantee long-term operation of the device, you are advised to replace the failed fan module immediately. |
| Redundant power supply | 1+1 backup |
| Number of power modules | 2 |
| Power supply surge protection | AC power protection: 6 kV in common mode and 6 kV in differential mode 240 V HVDC power protection: 4 kV in common mode and 2 kV in differential mode -48 V DC power supply protection: 4 kV in common mode and 2 kV in differential mode |
| Types of fans | Pluggable |
| Number of fans | 6 |
| Airflow direction | port-side intake/port-side exhaust airflow |
| Storage temperature | -40°C to +70°C (-40°F to +158°F) |
| Long-term operating temperature | 0°C to 40°C (32°F to 104°F) at an altitude of 0-1800 m (0-5906 ft.) Note: When the altitude is 1800-5000 m (5096-16404 ft.), the highest operating temperature reduces by 1°C (1.8°F) every time the altitude increases by 220 m (722 ft.). |
| Storage relative humidity [RH] | 5% to 95% RH, non-condensing |
| Long-term operating relative humidity [RH] | 5% RH to 95% RH, noncondensing |
| Storage altitude | ≤ 5000 m (16404 ft.) |
| Long-term operating altitude | ≤ 5000 m (16404 ft.) |
| MTBF [year] | 21.59 years |
| MTTR [h] | 1.5 hours |
| Noise at high temperature (40°C, sound pressure) | - Front-to-back airflow: 71.8 dB(A) on average (maximum: 78.3 dB(A)) - Back-to-front airflow: 74.5 dB(A) on average (maximum: 78.9 dB(A)) |
| Noise at normal temperature (27°C, sound pressure) | - Front-to-back airflow: 56.5 dB(A) on average (maximum: 61.7 dB(A)) - Back-to-front airflow: 58.7 dB(A) on average (maximum: 62.9 dB(A)) |
| Availability | 0.9999920679 |
1.Original Carton Package.
2. As your requirement.
1. 3-7 Working days after received the payment.
2. Shipment: Sea transportation & Air transportation ( DHL / UPS / TNT / FedEx / EMS )
WE PROMISE:
1.Quality: All products from HUAWEI and new.
2.Reply on time: Your inquiry related to our products or price will be replied within 24 hours.
3.OEM&ODM: We can help you to design and put your good idea into products.
4.Warranty: 1-years warranty.
5.Technology support: On-site technical support, Telemaintenance, Free call and E-mail technology supports.
6.Training service support: Provide free training service on installation and debugging technology supports.
Kuanlu Information Technology Co., Ltd.(Kuanlu LTD) is a secondary operator in China, with 10 years of experience in data center operations. It provides services to over 200 data centers and secondary operators, and its end customers include many well-known internet companies such as Tencent and NetEase.
Kuanlu is also a domestic telecommunications equipment and service provider, and a gold medal agent for multiple devices such as Huawei, ZTE, H3C, and Ruijie. It can deliver carrier level network hardware products at lower prices, and core network equipment inventory exceeding $5 million can deliver products within 72 hours.
The core team comes from manufacturers such as Huawei and H3C, with technical staff certified by HCIE, HCNP, and other engineers. Most of them have more than 5 years of work experience and have a 7 * 24 hour fast response ability. They can provide users with planning, debugging, and emergency upgrade services.
The company has its own data transmission room and equipment maintenance factory, with a product database of over 300GB, focusing on data communication, transmission, wireless, server, storage, and security products. With no less than 1 year of after-sales tracking, it can provide users with remote and local installation services to ensure the stable operation of their equipment.
1.How can i get the price?
We usually quote within 24 hours after we get your inquiry (Except weekend and holidays). If you are very urgent to get the price, please email us or contact us in other ways so that we can offer you a quote.
2. Can I buy samples placing orders?
Yes. Please feel free to contact us.
3.What is your lead time?
It depends on the order quantity and the season you place the order. Usually we can ship within 7-15 days for small quantity, and about 30 days for large quantity.
4.What is your payment term?
-T/T, Western Union, Money Gram, and Paypal. This is negotiable.
5.What is the shipping method?
It could be shipped by sea, by air or by express (EMS,UPS,DHL,TNT,FEDEX and ect). Please confirm with us before placing orders.
6.How do you make our business long-term and good relationship?
a. We keep good quality and competitive price to ensure our customers benefit;
b. We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}