China Supply Lst7mpuec000 S12700e Series Network Switch Main Control Unit Ec

• Communication Mode: Full-Duplex & Half-Duplex
• Type: Ethernet Switch
• Transmission Rate: 10/100/1000Mbps
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: LST7MPUEC000
• Warranty: 1 Years
• Part Number: 03034hxl-001
• Power Supply Model: AC
• Use: Campus
• Transport Package: Mail Box Packing
• Trademark: Hua Wei
• Origin: Hubei, China
• Production Capacity: 200 Piece/Pieces Per Month

Product Description

Product Description

 Product Characteristics

Huawei CloudEngine S12700E series agile switches are core switches designed for next-generation campus networks.

• Using a fully programmable switching architecture, the S12700E series switches allow for fast, flexible function customization and support a smooth evolution to software-defined networking (SDN).
• The S12700E series switches provide the native wireless access controller (AC) capability to help build a wired and wireless converged network. Their unified user management capabilities deliver refined user and service management, and Huawei's Packet Conservation Algorithm for Internet (iPCA) supports hop-by-hop monitoring of any service flows, helping you manage services in a more refined way.
• The S12700E series switches run Huawei Versatile Routing Platform (VRP), which provides high-performance L2/L3 switching services as well as a variety of network services, such as MPLS VPN, desktop cloud, and video conferencing.
• The S12700E series switches adopt next generation switch fabric (NGSF), and use the cell switching technology to reduce the forwarding latency and improve the load balancing capability of switch fabric units (SFUs).
• The S12700E series switches support single-link 100G hardware clustering and a variety of reliability technologies such as hardware Ethernet OAM, BFD, and ring network protection. These help you improve productivity and maximize network operation time, and therefore reduce the total cost of ownership (TCO).

The S12700E series switches come in three models: S12700E-4, S12700E-8, and S12700E-12. The maximum numbers of line processing units and switch fabric units supported by these models are:

• S12700E-4: 2 MPUs, 2 SFUs, and 4 LPUs
• S12700E-8: 2 MPUs, 4 SFUs, and 8 LPUs
• S12700E-12: 2 MPUs, 4 SFUs and 12 LPUs

Make Your Network More Agile and Service-oriented

The S12700E series switches provide fully programmable interfaces, and support forwarding process customization.

• The device's flexible packet processing and traffic control capabilities help to build a highly scalable network that meets current and future service requirements. The S12700E series switches use a fully programmable architecture, on which enterprises can define their own forwarding models, forwarding behaviors, and lookup algorithms. This architecture speeds up service innovation and makes it possible to provision a new service within several months, without replacing hardware. Therefore, the S12700E series switches provide much higher flexibility than traditional with fixed forwarding architecture and fixed forwarding process (1-3 years taken for provisioning a new service).
• In addition to all the capabilities of common switches, the S12700E series switches provide fully programmable open interfaces and support programmable forwarding behaviors. Enterprises can use the open interfaces to develop new protocols and functions independently or jointly with other vendors to satisfy their needs.

Deliver Extensive Services More Efficiently

The S12700E series switches provide hardware native T-bit AC and unified user management functions, allowing for more agile service features.

• The native AC allows enterprises to build a wireless network without additional hardware AC devices. The T-bit AC capability avoids performance bottlenecks on independent AC devices and helps you better cope with challenges in the high-speed wireless access era.
• Providing the unified user management function that shields the differences of access devices in capacity and access methods. It supports PPPoE, 802.1X, MAC, and Portal authentication, and can manage users based on user groups, domains, and time ranges. These functions facilitate user and service management and enable a transformation from device-centered to user-centered management.
• The service chain function can orchestrate value-added service capabilities, such as firewall, antivirus expert system (AVE), and application security gateway (ASG). Then these capabilities can be used by campus network entities (such as switches, routers, AC, AP, and terminals), regardless of the physical locations. The service chain function allows for more flexible value-added service deployment, which reduces equipment and maintenance costs.

Provide Fine Granular Management More Efficiently

The S12700E series switches support Packet Conservation Algorithm for Internet (iPCA) and super virtual fabric (SVF), and can manage access switches, allowing for fine-granular network management.

• iPCA technology can monitor network quality for any service flow at any network node, anytime, without extra costs. It can detect temporary service interruptions within 1 second and accurately identify faulty ports. This cutting-edge fault detection technology allows for fine granular management.
• SVF technology can virtualize fixed switches into line cards of S12700E series switches and virtualize APs into their ports. With this technology, a physical network with core/aggregation switches, access switches, and APs can be virtualized into one logical switch, offering the simplest network management solution.
• The S12700E series switches manage access switches in a similar way an AC manages APs, removing the configuration workload on access switches. They manage access switches and APs uniformly over CAPWAP tunnels, implementing Zero Touch Provisioning (ZTP) of access switches and APs.

Industry-Leading Line Cards

Industry-leading line cards of the S12700E series switches support large table sizes and provide low-latency forwarding of heavy traffic.

• The S12700E series switches support several million hardware entries, leaving traditional switches far behind. The S12700E series switches provide large routing tables for metro core layer of television broadcasting or education network and fine granular traffic statistics collection for education campus networks and large-scale enterprise campus networks.
• The S12700E series switches provide a large buffer size on each line card to prevent packet loss upon traffic bursts, delivering high-quality video services.
• The S12700E series switches support high-density cards featuring non-blocking forwarding, such as 48*10GE, 6*100GE, and 24*100GE cards. These large port capacities meet the requirements of bandwidth-consuming applications, such as multimedia video conferencing, and provide investment protection for customers.

Network-Level Reliability Design: End-to-End Hardware Protection Switching

The S12700E series switches use a series of link detection and protection switching technologies, such as hardware Eth-OAM, BFD, G.8032, and Smart Ethernet Protection (SEP). These technologies help build a campus network that responds quickly to topology changes and provides the most reliable services.

Comprehensive Security Measures

• Supporting MAC security (MACsec) that enables hop-by-hop secure data transmission. Therefore, the S12700E series switches can be applied to scenarios that pose high requirements on data confidentiality, such as government and finance sectors.
• Providing innovative next-generation environment awareness and access control. It identifies the application-layer attacks and protects network-layer applications based on application type, content, time, user, threat, and location.
• The dedicated software and hardware platforms provide an Intelligent Aware Engine (IAE) to perceive application information when all security functions are enabled. The built-in hardware accelerator for content detection improves application-layer protection efficiency and ensures the 10G+ performance when all security functions are enabled.

Cloud-based Management

In Huawei CloudCampus Solution, switches can be managed by the management and control system (CloudCampus@AC-Campus for switches running V200R019C00 and earlier versions; iMaster NCE-Campus for switches running V200R019C10 and later versions).

• The switches are plug-and-play.
• The switches can automatically connect to the management and control system and use bidirectional certificate authentication to ensure management channel security.
• The switches provide the NETCONF and YANG interfaces, through which the management and control system delivers configurations to them.
• Remote maintenance and fault diagnosis can be performed on the switches using the management and control system.

VXLAN

The S12700E series switches are VXLAN-capable and allow centralized and distributed VXLAN gateway deployment modes. These switches also support the BGP EVPN protocol for dynamically establishing VXLAN tunnels and can be configured using NETCONF or YANG. VXLAN is used to construct a Unified Virtual Fabric (UVF). As such, multiple service networks or tenant networks can be deployed on the same physical network, and service and tenant networks are isolated from each other. This capability truly achieves 'one network for multiple purposes'. The resulting benefits include enabling data transmission of different services or customers, reducing the network construction costs, and improving network resource utilization.

OPS

Open Programmability System (OPS) is an open programmable system based on the Python language. IT administrators can program the O&M functions of a switch through Python scripts to quickly innovate functions and implement intelligent O&M.

Intelligent Diagnosis

Open Intelligent Diagnosis System (OIDS) integrates the device health monitoring and fault diagnosis functions - that are typically deployed on a Network Management System (NMS) - into the switch software to implement intelligent diagnosis on a single switch. After OIDS is deployed on a switch, the switch periodically collects and records the running information and automatically determines whether a fault occurs. If a fault occurs, the switch automatically locates the fault or helps locate the fault. All these merits increase fault locating efficiency of O&M staff while improving device maintainability.

 

Basic Information
Description	S12700E main control unit EC
Part Number	03034HXL-001
Model	LST7MPUEC000
Level-1 category	MPU
Technical Specifications
Dimensions without packaging (H x W x D) [mm(in.)]	35.1 mm x 397.2 mm x 430.4 mm (1.38 in. x 15.64 in. x 16.94 in.)
Dimensions with packaging (H x W x D) [mm(in.)]	160 mm x 510 mm x 570 mm (6.30 in. x 20.08 in. x 22.44 in.)
Weight without packaging [kg(lb)]	2.60 (5.73)
Weight with packaging [kg(lb)]	4.92 (10.85)
Typical power consumption [W]	34
Typical heat dissipation [BTU/hour]	116.01
Maximum power consumption [W]	40
Maximum heat dissipation [BTU/hour]	136.48
Memory	8 GB, non-scalable
Storage	NAND flash: 2 GB, built-in

 

  Ports on the LST7MPUEC000

Port	Connector Type	Description	Available Components
USB port	USB 2.0 Type A	One USB port. A USB flash drive can be inserted into this port to load the system software to the switch during device deployment.	USB flash drive
Console port	RJ45	You can connect to a configuration terminal through this port for onsite configuration.	Console cable
ETH management port	RJ45	One ETH management port (10M/100M BASE-TX auto-sensing). It can connect to a network port of a configuration terminal or network management workstation to set up a local or remote configuration environment.	Ethernet cable

 

 Functions and features of the LST7MPUEC000

Functions and Features	Description
Basic functions	The MPU is the system control and management unit for the switch. It integrates the main control unit, clock unit, and system maintenance unit.
OAM	The MPU supports the following OAM functions: 802.1ag: identifies, detects, and sends continuity check (CC) packets. Multiprotocol Label Switching (MPLS OAM): identifies, detects, and sends MPLS OAM packets. OAM UNCFG_MEP.
Redundancy backup	1+1 hot standby Main control board is mandatory for switches. Each switch must be configured with one or two main control boards. When one main control board is configured for a switch, the main control board can be installed in either main control board slot of the switch. When two main control boards are configured, the two main control boards work in hot standby mode to improve reliability of the switch. The active and standby main control boards monitor the status of each other. If the active main control board fails, the standby main control board automatically becomes active to ensure uninterrupted services.
Hot swapping	Supported Before removing the active card, perform an active/standby switchover.

 

 

 

 

 

 

Our Services

 

1.Quality: All products from HUAWEI and new.

2.Reply on time: Your inquiry related to our products or price will be replied within 24 hours.

3.OEM&ODM: We can help you to design and put your good idea into products.

4.Warranty: 1-years warranty.

5.Technology support: On-site technical support, Telemaintenance, Free call and E-mail technology supports.

6.Training service support: Provide free training service on installation and debugging technology supports.

 

 

Company Information

 

Kuanlu Information Technology Co., Ltd(Kuanlu LTD)/HUAWEI Authorized agent. Kuanlu  is a Global Provider of Telecommunication Equipment and Services.And Extending Business to ICT (Information and Communication Technology) Field. We buy&sell Original NEW&REF telecom equipment from carriers and market to other companies who need them.We offer carrier class telecommunication hardware at 80-90% OFF list. We provide network design&planning, configration, troubleshooting, maintenance and training service in world wide. Kuanlu  Stock More than $5million Huawei products in stock.

Delivery your order within 72hours base on quick response ability. Focus on High-end telecom products including IP Data,Transmission,Wireless,Server&Storage and spare parts.  Most Shenghua Employees from Huawei& ZTE. Sales team over 5years experience advise you select products. Engineers team over 5years experience offer remote or local installation and configuration service. Expert team over 10years experience help you plan your network.

 

 

Packaging & Shipping

 

Packing:

 

1.Original Carton Package.

2. As your requirement.

 

Delivery:

 

1. 3-7 Working days after received the payment.

2. Shipment: Sea transportation & Air transportation ( DHL / UPS / TNT / FedEx / EMS )

FAQ

 

1.How can i get the price?

We usually quote within 24 hours after we get your inquiry (Except weekend and holidays). If you are very urgent to get the price, please email us or contact us in other ways so that we can offer you a quote.

2. Can I buy samples placing orders?

Yes. Please feel free to contact us.

3.What is your lead time?

It depends on the order quantity and the season you place the order. Usually we can ship within 7-15 days for small quantity, and about 30 days for large quantity.

4.What is yourpayment term?

-T/T, Western Union, Money Gram, and Paypal. This is negotiable.

5.What is the shipping method?

It could be shipped by sea, by air or by express (EMS,UPS,DHL,TNT,FEDEX and ect). Please confirm with us before placing orders.

6.How do you make our business long-term and good relationship?

a. We keep good quality and competitive price to ensure our customers benefit;

b. We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.