98010900 S1730s-S24t4s-a Network Switches (24*10/100/1000BASE-T Ports, 4*1GE SFP Ports)

• Customization: Available
• Communication Mode: Full-Duplex & Half-Duplex
• Type: Ethernet Switch
• Model NO.: S1730S-S24T4S-A
• Transmission Rate: 10/100/1000Mbps
• Ports: 24*10/100/1000base-T Ports,4*1ge SFP Ports
• Forwarding Performance: 1620mpps
• Switching Capacity: 2.56t
• Uplink Ports: 24*10/100/1000base-T Ports
• Downlink Ports: 4*1ge SFP Ports
• Chassis Height: 1 U
• Number of Power Slots: 0
• Redundant Power Supply: Not Support
• Operating Voltage: - AC Input: 90 V AC to 264 V AC, 47 Hz to 63 Hz -
• Number of Card Slots: 0
• Vlan: Access,Trunk,and Hubrid Ports
• Vxlan: Support
• Poe: Not Support
• Transport Package: Box Packaging
• Specification: 4.08kg
• Trademark: HW
• Origin: China
• Production Capacity: 500 Pieces/Month
• Package Size: 4.36cm * 4.42cm * 22.00cm
• Package Gross Weight: 4.080kg

Product Description

Product Description

 

Basic Information
Part Number	98010900
Model	S1730S-S24T4S-A
Description	S1730S-S24T4S-A (24*10/100/1000BASE-T ports, 4*GE SFP ports, AC power)

 

Technical Specifications
Height [mm]	43.6 mm
Depth [mm]	220.0 mm
Wide [mm]	442.0 mm
Chassis height [U]	1
Weight with packaging [kg(lb)]	4.08
Maximum power consumption [W]	34
Typical power consumption [W]	28
Heat dissipation mode	Natural heat dissipation without fans
Maximum heat dissipation [BTU/hour]	116
Typical heat dissipation [BTU/hour]	95.54
Power supply mode	AC built-in
Input voltage range [V]	- AC input: 90 V AC to 264 V AC, 47 Hz to 63 Hz - High-Voltage DC input: 190 V DC to 290 V DC
Rated input voltage [V]	- AC input: 100 V AC to 240 V AC, 50/60 Hz - High-Voltage DC input: 240 V DC
Maximum input current [A]	2 A
Number of power slots	0
Number of card slots	0
Memory	1 GB
Flash memory	512 MB in total. To view the available flash memory size, run the display version command.
Redundant power supply	Not supported
Types of fans	None
Noise at normal temperature (acoustic power) [dB(A)]	Noise-free (no fans)
Noise at normal temperature (acoustic pressure) [dB(A)]	Noise-free (no fans)
Airflow direction	-
Storage temperature [°C(°F)]	-40°C to +70°C (-40°F to +158°F)
Long-term operating temperature [°C(°F)]	-5°C to +45°C (23°F to 113°F) at an altitude of 0-1800 m (0-5906 ft.)
Restriction on the operating temperature variation rate [°C(°F)]	When the altitude is 1800-5000 m (5906-16404 ft.), the highest operating temperature reduces by 1°C (1.8°F) every time the altitude increases by 220 m (722 ft.). The switch cannot be started when the ambient temperature is lower than 0°C (32°F). The operating temperature of the switch is -5°C to +40°C (23°F to 104°F) when it uses GE SFP optical modules with 40 km or longer transmission distance.
Long-term operating relative humidity [RH]	5% to 95%, noncondensing
Storage altitude [m(ft.)]	0-5000 m (0-16404 ft.)
Long-term operating altitude [m(ft.)]	0-5000 m (0-16404 ft.)
MTBF [year]	92.82
MTTR [hour]	2
Availability	>0.99999
1000M optical interface	4
1000M electrical interface	24
USB	Supported
Console port	RJ45
Eth Management port	RJ45
Service port surge protection [kV]	Common mode: ±7 kV
Power supply surge protection	±6 kV in differential mode, ±6 kV in common mode
RPS input	Not supported
PoE	Not supported

Basic Information
 

	Description	S1730S-S24T4S-A (24*10/100/1000BASE-T ports, 4*GE SFP ports, AC power)
	Part Number	98010900
	Model	S1730S-S24T4S-A

 

Detailed Photos

 

 

Product Parameters

 

10/100/1000BASE-T port

A 10/100/1000BASE-T Ethernet electrical port sends and receives service data at 10/100/1000 Mbit/s. Table 1 describes the attributes of a 10/100/1000BASE-T Ethernet electrical port.

Table 1 Attributes of a 10/100/1000BASE-T Ethernet electrical port

Attribute	Description
Connector type	RJ45
Standards compliance	IEEE802.3, IEEE802.3u, IEEE802.3ab
Working mode	10/100/1000 Mbit/s auto-sensing
Maximum transmission distance	100 m

1000BASE-X port

When a 1000BASE-X port uses a GE optical module, it can only transmit and receive data at 1000 Mbit/s and does not support the 100 Mbit/s transmission speed. When a 1000BASE-X port uses a FE optical module, it can transmit and receive data at 100 Mbit/s. When a 1000BASE-X port uses a GE copper module, it can transmit and receive data at 10 Mbit/s, 100 Mbit/s, or 1000 Mbit/s. Table 2 describes the attributes of a 1000BASE-X port.

Table 2 Attributes of a 1000BASE-X port

Attribute	Description
Connector type	LC/PC
Optical port attributes	Depend on the module used
Standards compliance	IEEE802.3z

Console port

The console port is connected to a console for on-site configuration. Table 3 describes the attributes of the console port.

Table 3 Attributes of the console port

Attribute	Description
Connector type	RJ45
Standards compliance	RS-232
Working mode	Duplex Universal Asynchronous Receiver/Transmitter (UART)
Baud rate	9600 bit/s, 19200 bit/s, 38400 bit/s, 57600 bit/s, or 115200 bit/s Default value: 9600 bit/s

ETH management port

You can connect a switch to a configuration terminal or network management workstation through the ETH management port to configure the switch locally or remotely. Table 4 describes the attributes of an ETH management port. You can log in to the switch that contains the ETH management port for the first time through the ETH management port. For details, see "First Login to a Switch" in the Configuration Guide - Basic Configuration. If you have logged in to the switch for the first time by pressing and holding the MODE button for 6 seconds or longer and saved the configuration, the default configuration on the ETH management port will be cleared. In this case, you cannot log in to the switch for the first time through the ETH management port. You are advised to log in to the switch for the first time through the ETH management port.

Table 4 Attributes of an ETH management port

Attribute	Description
Connector type	RJ45
Standards compliance	IEEE802.3
Working mode	10/100 Mbit/s auto-sensing
Maximum transmission distance	100 m

USB port

The USB port can have a USB flash drive connected to upgrade the switch, or transfer configuration files or other files. The USB port can only connect to a USB flash drive that complies with USB 2.0.
 

Power Supply Configuration

The S1730S-S24T4S-A has a built-in AC power module and does not support pluggable power modules.


 

Item	Description
Memory (RAM)	1 GB
Flash	512 MB in total. To view the available flash memory size, run the display version command.
Mean time between failures (MTBF)	92.82 years
Mean time to repair (MTTR)	2 hours
Availability	> 0.99999
Service port surge protection	Common mode: ±7 kV
Power supply surge protection	±6 kV in differential mode, ±6 kV in common mode
Dimensions (H x W x D)	Basic dimensions (excluding the parts protruding from the body): 43.6 mm x 442.0 mm x 220.0 mm (1.72 in. x 17.40 in. x 8.66 in.) Maximum dimensions (the depth is the distance from ports on the front panel to the parts protruding from the rear panel): 43.6 mm x 442.0 mm x 227.0 mm (1.72 in. x 17.40 in. x 8.94 in.)
Weight (including packaging)	4.08 kg (8.99 lb)
Stack ports	Not supported
RTC	Not supported
RPS	Not supported
PoE	Not supported
Rated voltage range	100 V AC to 240 V AC, 50/60 Hz High-voltage DC input: 240 V DC
Maximum voltage range	90 V AC to 264 V AC, 47 Hz to 63 Hz High-voltage DC input: 190 V DC to 290 V DC
Maximum power consumption (100% throughput)	34 W
Typical power consumption (30% of traffic load, tested according to ATIS standard, with EEE enabled)	28 W
Operating temperature	-5°C to +45°C (23°F to 113°F) at an altitude of 0-1800 m (0-5906 ft.) NOTE: When the altitude is 1800-5000 m (5906-16404 ft.), the highest operating temperature reduces by 1°C (1.8°F) every time the altitude increases by 220 m (722 ft.). The equipment cannot start when the temperature is lower than 0°C (32°F). The operating temperature of the switch is -5°C to +40°C (23°F to 104°F) when it uses GE SFP optical modules with 40 km or longer transmission distances.
Storage temperature	-40°C to +70°C (-40°F to +158°F)
Noise under normal temperature (27°C, sound power)	Noise-free (no fans)
Relative humidity	5% to 95%, noncondensing
Operating altitude	0-5000 m (0-16404 ft.)
Certification	EMC certification Safety certification Manufacturing certification
Part number	98010900

Packaging & Shipping

 

	Packing: 1.Original Carton Package. 2. As your requirement.
	Delivery: 1. 3-7 Working days after received the payment. 2. Shipment: Sea transportation & Air transportation ( DHL / UPS / TNT / FedEx / EMS )

 

Installation and service

Installation Instructions:
1. Original equipment installation documents can be provided, and installation videos can be provided for some products;
2. Technicians provide remote video guidance for installation;
3. Provide software upgrade documentation and partial upgrade software

After Sales Service:
1. Quality: All products are assumed to be brand new and traceable in origin.
2. Timely response: Your inquiries about our products or prices will be replied to within 4 hours.
3. OEM&ODM: We support helping you design and transform your good ideas into products.
4. Warranty: The default warranty is 1 year, which can be extended according to customer needs. The software provides upgrade and expansion services.
5. Technical support: on-site technical support, remote maintenance, free phone and email technical support.
6. Training service support: Free installation, debugging, technical support, and training services are provided.

Company Information

 

Kuanlu Information Technology Co., Ltd.(Kuanlu LTD) is a secondary operator in China, with 10 years of experience in data center operations. It provides services to over 200 data centers and secondary operators, and its end customers include many well-known internet companies such as Tencent and Wangsu.

 

Kuanlu is also a domestic telecommunications equipment and service provider, and a gold medal agent for multiple devices such as HW, Z TE, H 3C, and Ruijie. It can deliver carrier level network hardware products at lower prices, and core network equipment inventory exceeding $5 million can deliver products within 72 hours.

 

 

FAQ

 

1.How can i get the price?
We usually quote within 24 hours after we get your inquiry (Except weekend and holidays). If you are very urgent to get the price, please email us or contact us in other ways so that we can offer you a quote.

2. Can I buy samples placing orders?
Yes. Please feel free to contact us.

3.What is your lead time?
It depends on the order quantity and the season you place the order. Usually we can ship within 7-15 days for small quantity, and about 30 days for large quantity.

4.What is yourpayment term?
-T/T, Western Union, Money Gram, and Paypal. This is negotiable.

5.What is the shipping method?
It could be shipped by sea, by air or by express (EMS,UPS,DHL,TNT,FEDEX and ect). Please confirm with us before placing orders.

6.How do you make our business long-term and good relationship?
a. We keep good quality and competitive price to ensure our customers benefit;
b. We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.