Brand New Es1BS7703sp0 02115782 Poe Network Switch Assembly Chassis for S7700 Series in Stock

• Customization: Available
• Communication Mode: Full-Duplex & Half-Duplex
• Type: Ethernet Switch
• Model NO.: ES1BS7703SP0
• Transmission Rate: 10/100/1000Mbps
• Application Neighborhood: Campus Switches
• Country of Origin: China
• Warranty: 1 Years
• Description: S7703 Poe Assembly Chassis
• Part Number: 02115782
• Use: Campus Switches
• Model: Es1BS7703sp0
• Transport Package: Mail Box Packing
• Trademark: HW
• Origin: Hubei, China
• Production Capacity: 100 Piece/Pieces Per Month

Product Description

Product Description

S7703 PoE

Mapping between the S7703 PoE chassis and software versions

Chassis	Version
S7703 PoE chassis	V200R013C00 and later versions

S7703 PoE

S7703 PoE slot configuration

Slot Type	Slot ID	Module Supported	Remarks
MPU slot	SLOT4 and SLOT5	MPUs	The two MCUs work in active/standby mode.
LPU slot	SLOT1 to SLOT3	Open Service Platform Unit 100M Interface Card 1000M Interface Card GE/10GE Interface Card 10GE Interface Card 40GE Interface Card 40GE/100GE Interface Card 100GE Interface Card	NOTE: The cards supported by a switch depend on the software version. For details, see Info-finder.
Power supply slot	PWR1 to PWR3	Power Modules 800 W AC Power Module 2200 W AC Power Module 2200 W DC Power Module 3000 W AC Power Module	-
Fan module slot	FAN1	Fan Module	-

S7703 PoE

Power module configuration (DC power input)

Power Module Type	Redundancy Mode	Maximum Output Power
2200 W DC power module	N+1	A maximum of three 2200 W DC power modules can be configured (1 M + 1 S + 1 A or 2 Ms + 1 S), providing a maximum output power of 4400 W.
	N+0 (no redundancy)	A maximum of three 2200 W DC power modules can be configured (3 As), providing a maximum output power of 6600 W.

 

 S7703 PoE

Power module configuration (220 V single-phase or 110 V dual-live-wire AC power input)

Power Module Type	Redundancy Mode	Maximum Output Power
3000 W AC power module	N+1	A maximum of three 3000 W DC power modules can be configured (1 M + 1 S + 1 A or 2 Ms + 1 S), providing a maximum output power of 6000 W.
	N+0 (no redundancy)	A maximum of three 3000 W DC power modules can be configured (3 As), providing a maximum output power of 9000 W.
2200 W AC power module	N+1	A maximum of three 2200 W DC power modules can be configured (1 M + 1 S + 1 A or 2 Ms + 1 S), providing a maximum output power of 4400 W.
	N+0 (no redundancy)	A maximum of three 2200 W DC power modules can be configured (3 As), providing a maximum output power of 6600 W.
800 W AC power module	N+1	A maximum of three 800 W DC power modules can be configured (1 M + 1 S + 1 A or 2 Ms + 1 S), providing a maximum output power of 1600 W.
	N+0 (no redundancy)	A maximum of three 800 W DC power modules can be configured (3 As), providing a maximum output power of 2400 W.

 

S7703 PoE

Power module configuration (110 V single-live-wire AC power input is provided)

Power Module Type	Redundancy Mode	Maximum Output Power
3000 W AC power module	N+1	A maximum of three 3000 W DC power modules can be configured (1 M + 1 S + 1 A or 2 Ms + 1 S), providing a maximum output power of 3000 W.
	N+0 (no redundancy)	A maximum of three 3000 W DC power modules can be configured (3 As), providing a maximum output power of 4500 W.
2200 W AC power module	N+1	A maximum of three 2200 W DC power modules can be configured (1 M + 1 S + 1 A or 2 Ms + 1 S), providing a maximum output power of 2200 W.
	N+0 (no redundancy)	A maximum of three 2200 W DC power modules can be configured (3 As), providing a maximum output power of 3300 W.
800 W AC power module	N+1	A maximum of three 800 W DC power modules can be configured (1 M + 1 S + 1 A or 2 Ms + 1 S), providing a maximum output power of 800 W.
	N+0 (no redundancy)	A maximum of three 800 W DC power modules can be configured (3 As), providing a maximum output power of 1200 W.

 

 S7703 PoE

S7703 PoE chassis specifications

Item	Description
LPU slots	3
MPU slots	2
Fan slots	1
Power supply slots	3
Maximum port density	V200R013C00 to V200R019C00: 144xFE, 144xGE, 144x10GE, 24x40GE, 12x100GE V200R019C00 and later versions: 144xFE, 144xGE, 144x10GE, 24x40GE, 18x100GE
Installation	In an N66E or N68E cabinet
CSS	Not supported
Maximum power consumption (fully configured, no PoE power supply) NOTE: The heat dissipation value of a chassis equals the current power consumption of the chassis.	1185W
Power specifications	DC input voltage Rated voltage: -48 V DC/-60 V DC Maximum voltage range: -40 V DC to -72 V DC AC input voltage Rated voltage: 110 V AC/220 V AC, 50/60 Hz Maximum voltage range: 90 V AC to 290 V AC; 47 Hz to 63 Hz (The output power reduces to half of the maximum output when the input voltage is in the range of 90 V AC to 175 V AC.) HVDC input voltage (3000 W AC) Rated voltage: 240 V DC Maximum voltage range: 190 V DC to 290 V DC
Dimensions (H x W x D, without rack-mounting brackets)	With cable management frames (4 U high): 175 mm x 442 mm x 585 mm (6.9 in. x 17.4 in. x 23.0 in.) Without cable management frames (4 U high): 175 mm x 442 mm x 517.4 mm (6.9 in. x 17.4 in. x 20.37 in.)
Weight (empty/fully configured)	10.3 kg/33.8 kg (22.7 lb/74.5 lb)
Reliability and availability	Mean time between failures (MTBF): 33.8 years Mean time to repair (MTTR): 2 hours Availability: 0.9999964 NOTE: The preceding values are calculated based on the typical configuration of the product. The actual values will vary depending on the modules installed on the product.
Environment specifications	Operating temperature and altitude: -60 m to +1800 m (-197 ft. to 5906 ft.): 0°C to 45°C (32°F to 113°F) 1800 m to 4000 m (5906 ft. to 13123 ft.): Operating temperature decreases by 1°C (1.8°F) every time the altitude increases 220 m (722 ft.). 4000 m (13123 ft.): 0°C to 35°C (32°F to 95°F) Relative humidity: 5% RH to 95% RH (noncondensing) Storage temperature: -40°C to +70°C (-40°F to +158°F) Storage altitude: < 5000 m (16404 ft.)
Noise at normal temperature (acoustic power)	≤ 72 dB(A)
Certification	EMC certification Safety certification Manufacturing certification
Part number	S7703 PoE chassis: 02115782

 

 

 

Packaging & Shipping

Packing:

1.Original Carton Package.

2. As your requirement.

 

Delivery:

1. 3-7 Working days after received the payment.

2. Shipment: Sea transportation & Air transportation ( DHL / UPS / TNT / FedEx / EMS )

Our Services

1.Quality: All products are new.

2.Reply on time: Your inquiry related to our products or price will be replied within 24 hours.

3.OEM&ODM: We can help you to design and put your good idea into products.

4.Warranty: 1-years warranty.

5.Technology support: On-site technical support, Telemaintenance, Free call and E-mail technology supports.

6.Training service support: Provide free training service on installation and debugging technology supports.

Company Information

Kuanlu Information Technology Co., Ltd.(Kuanlu LTD) is a secondary operator in China, with 10 years of experience in data center operations. It provides services to over 200 data centers and secondary operators, and its end customers include many well-known internet companies such as Tencent and Wangsu.

 

Kuanlu is also a domestic telecommunications equipment and service provider, and a gold medal agent for multiple devices such as Hua wei, ZTE, H3C, and Ruijie. It can deliver carrier level network hardware products at lower prices, and core network equipment inventory exceeding $5 million can deliver products within 72 hours.

 

The core team comes from manufacturers such as Hua wei and H3C, with technical staff certified by HCIE, HCNP, and other engineers. Most of them have more than 5 years of work experience and have a 7 * 24 hour fast response ability. They can provide users with planning, debugging, and emergency upgrade services.

 

The company has its own data transmission room and equipment maintenance factory, with a product database of over 300GB, focusing on data communication, transmission, wireless, server, storage, and security products. With no less than 1 year of after-sales tracking, it can provide users with remote and local installation services to ensure the stable operation of their equipment.

 

FAQ

1.How can i get the price?
We usually quote within 24 hours after we get your inquiry (Except weekend and holidays). If you are very urgent to get the price, please email us or contact us in other ways so that we can offer you a quote.

2. Can I buy samples placing orders?
Yes. Please feel free to contact us.

3.What is your lead time?
It depends on the order quantity and the season you place the order. Usually we can ship within 7-15 days for small quantity, and about 30 days for large quantity.

4.What is yourpayment term?
-T/T, Western Union, Money Gram, and Paypal. This is negotiable.

5.What is the shipping method?
It could be shipped by sea, by air or by express (EMS,UPS,DHL,TNT,FEDEX and ect). Please confirm with us before placing orders.

6.How do you make our business long-term and good relationship?
a. We keep good quality and competitive price to ensure our customers benefit;
b. We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.