Brand New Et1BS12704e0 02115869 S12700e-4 Ethernet Switch Assembly Chassis for S12700e Series in Stock

• Communication Mode: Full-Duplex & Half-Duplex
• Type: Ethernet Switch
• Transmission Rate: 10/100/1000Mbps
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: ET1BS12704E0
• Chassis: S12700e-4 Chassis
• Warranty: 1 Years
• Part Number: 02115869
• Version: Supported in V200r019c00 and Later Versions
• Use: Campus Switch
• Model: Et1BS12704e0
• Transport Package: Mail Box Packing
• Trademark: HW
• Origin: Hubei, China
• Production Capacity: 200 Piece/Pieces Per Month

Product Description

Product Description

 S12700E-4

Mapping between the S12700E-4 chassis and software versions

Chassis	Version
S12700E-4 chassis	Supported in V200R019C00 and later versions

S12700E-4

Description of power redundancy modes

Redundancy Mode	Description	Product Support
N+N	System power supply is not affected if no more than N power modules are removed or fail. The maximum output power of the system is the total maximum output power of N power modules. The first N represents mandatory power modules, and the second N represents optional power modules. NOTE: The N+N redundancy mode is often used when two power supply systems are available. In this case, the first N represents mandatory power modules for the first power supply system, and the second N represents mandatory power modules for the second power supply system. The use of double power supply systems provides redundancy for both power modules and power supply systems. If the device consumes little power and is equipped with multiple power modules, the number of standby power modules may exceed that of active power modules. For example, the power modules work in 1+2 or 1+3 backup mode.	1+1 and 2+2 redundancy
N+1	System power supply is not affected if one power module is removed or fails. The maximum output power of the system is the total maximum output power of N power modules. N power modules are mandatory, and one power module is optional.	1+1, 2+1 and 3+1 redundancy
N+0 (no redundancy)	System power supply is affected once any power module is removed or fails. The maximum output power of the system is the total maximum output power of N power modules. N power modules are mandatory, and there are no optional power modules.	1+0, 2+0, 3+0, and 4+0

 S12700E-4

Power module configuration (110 V single-live-wire AC power input is provided)

Chassis Model	Power Module Type	Redundancy Mode	Maximum Output Power
S12700E-4	3000 W AC power module	N+N	A maximum of 4 (2+2) 3000 W AC power modules can be configured, providing a maximum output power of 3000 W.
		N+1	A maximum of 4 (3+1) 3000 W AC power modules can be configured, providing a maximum output power of 4500 W.
		N+0 (no redundancy)	A maximum of 4 (4+0) 3000 W AC power modules can be configured, providing a maximum output power of 6000 W.

 

S12700E-4

Power module configuration (220 V single-phase or 110 V dual-live-wire AC power input)

Power Module Type	Redundancy Mode	Maximum Output Power
3000 W AC power module	N+N	A maximum of 4 (2+2) 3000 W AC power modules can be configured, providing a maximum output power of 6000 W.
	N+1	A maximum of 4 (3+1) 3000 W AC power modules can be configured, providing a maximum output power of 9000 W.
	N+0 (no redundancy)	A maximum of 4 (4+0) 3000 W AC power modules can be configured, providing a maximum output power of 9000 W.

 

 

S12700E-4

Power module configuration (DC power input)

Power Module Type	Redundancy Mode	Maximum Output Power
2200 W DC power module	N+N	A maximum of 4 (2+2) 2200 W DC power modules can be configured, providing a maximum output power of 4400 W.
	N+1	A maximum of 4 (3+1) 2200 W DC power modules can be configured, providing a maximum output power of 6600 W.
	N+0 (no redundancy)	A maximum of 4 (4+0) 2200 W DC power modules can be configured, providing a maximum output power of 8800 W.

 

S12700E-4

Specifications of the S12700E-4 series switches

Item	Description
Number of LPU slots	4
Number of MPU slots	2
Number of SFU slots	2
Number of fan slots	2
Number of power module slots	4
Number of CMU slots	2
Port density per chassis	192xFE, 192xGE, 192x10GE, 160x25GE, 96x40GE, 96x100GE
Installation	The switch can be installed in an N66E or N68E cabinet, one cabinet for one or two chassis.
Cluster switch system (CSS)	Service port clustering
Maximum power consumption (fully configured) NOTE: The heat dissipation value of a chassis is equal to the current power consumption.	3344 W
Power specifications	DC input voltage Rated voltage: -48 V DC to -60 V DC Maximum voltage range: -40 V DC to -72 V DC AC input voltage Rated voltage: 110 V AC/220 V AC, 50/60 Hz Maximum voltage range: 90 V AC to 290 V AC; 47 Hz to 63 Hz (The maximum output power reduces by a half when the input voltage ranges from 90 V AC to 175 V AC.) HVDC input voltage (3000 W AC) Rated voltage: 240 V DC Maximum voltage range: 190 V DC to 290 V DC
Dimensions (H x W x D, without rack-mounting brackets)	With cable management frames (10 U high): 441.7 mm x 442 mm x 585 mm (17.39 in. x 17.4 in. x 23.0 in.) Without cable management frames (10 U high): 441.7 mm x 442 mm x 517.4 mm (17.39 in. x 17.4 in. x 20.37 in.)
Weight (empty/fully configured)	24.5 kg/66 kg (54 lb/145.5 lb)
Reliability and availability	Mean Time Between Failures (MTBF): 33.38 years Mean time to repair (MTTR): 2 hours Availability: 0.99999658 NOTE: The preceding values are calculated based on the typical configuration of the product. The actual values will vary depending on the modules installed on the product.
Environment specifications	Operating temperature and altitude: -60 m to +1800 m (-197 ft. to 5906 ft.): 0°C to 45°C (32°F to 113°F) 1800 m to 4000 m (5906 ft. to 13123 ft.): Operating temperature decreases by 1°C (1.8°F) every time the altitude increases 220 m (722 ft.). 4000 m (13123 ft.): 0°C to 35°C (32°F to 95°F) Relative humidity: 5% RH to 95% RH (noncondensing) Storage temperature: -40°C to +70°C (-40°F to +158°F) Storage altitude: < 5000 m (16404 ft.)
Noise under normal temperature (sound power)	≤ 78 dB(A)
Certification	EMC certification Safety certification Manufacturing certification
Part number	02115869

Our Services

1.Quality: All products from HUAWEI and new.

2.Reply on time: Your inquiry related to our products or price will be replied within 24 hours.

3.OEM&ODM: We can help you to design and put your good idea into products.

4.Warranty: 1-years warranty.

5.Technology support: On-site technical support, Telemaintenance, Free call and E-mail technology supports.

6.Training service support: Provide free training service on installation and debugging technology supports.

Company Information

Kuanlu Information Technology Co., Ltd(Kuanlu LTD)/HUAWEI Authorized agent. Kuanlu is a Global Provider of Telecommunication Equipment and Services.And Extending Business to ICT (Information and Communication Technology) Field. We buy&sell Original NEW&REF telecom equipment from carriers and market to other companies who need them.We offer carrier class telecommunication hardware at 80-90% OFF list. We provide network design&planning, configration, troubleshooting, maintenance and training service in world wide. Kuanlu Products& Stock More than $5million Huawei products in stock.Delivery your order within 72hours base on quick response ability. Focus on High-end telecom products including IP Data,Transmission,Wireless,Server&Storage and spare parts. Most Kuanlu Employees are from Huawei& ZTE. Sales team over 5years experience advise you select products. Engineers team over 5years experience offer remote or local installation and configuration service. Expert team over 10years experience help you plan your network.

Packaging & Shipping

 

Packing:

 

1.Original Carton Package.

2. As your requirement.

 

Delivery:

 

1. 3-7 Working days after received the payment.

2. Shipment: Sea transportation & Air transportation ( DHL / UPS / TNT / FedEx / EMS )

FAQ

 

1.How can i get the price?

We usually quote within 24 hours after we get your inquiry (Except weekend and holidays). If you are very urgent to get the price, please email us or contact us in other ways so that we can offer you a quote.

2. Can I buy samples placing orders?

Yes. Please feel free to contact us.

3.What is your lead time?

It depends on the order quantity and the season you place the order. Usually we can ship within 7-15 days for small quantity, and about 30 days for large quantity.

4.What is yourpayment term?

-T/T, Western Union, Money Gram, and Paypal. This is negotiable.

5.What is the shipping method?

It could be shipped by sea, by air or by express (EMS,UPS,DHL,TNT,FEDEX and ect). Please confirm with us before placing orders.

6.How do you make our business long-term and good relationship?

a. We keep good quality and competitive price to ensure our customers benefit;

b. We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.