| Customization: | Available |
|---|---|
| Communication Mode: | Full-Duplex & Half-Duplex |
| Type: | Ethernet Switch |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Part Number | 02352NUN |
Model | CE6863-48S6CQ |
Description | CE6863-48S6CQ switch (48*25G SFP28, 6*100G QSFP28, 2*AC power modules, 4*fan modules, port-side intake) |
Technical Specifications | |
Other part numbers | 02352NUN (CE6863-48S6CQ switch (48*25G SFP28, 6*100G QSFP28, without fan and power modules)) 02352NUQ (CE6863-48S6CQ switch (48*25G SFP28, 6*100G QSFP28, 2*AC power modules, 4*fan modules, port-side exhaust)) |
Installation Type | Cabinet Installation |
Chassis height[U] | 1 |
Weight without packaging[kg(lb)] | 5.7 kg (excluding optical modules, power modules, and fan modules) |
Maximum power consumption[W] | 384 W |
Typical power consumption[W] | 226 W (100% throughput, SFP28 high-speed cables on 48 ports and QSFP28 high-speed cables on 6 ports, dual power modules) 261 W (100% throughput, short-distance optical modules on all ports, dual power modules) |
Static power consumption[W] | 167 W |
Heat dissipation mode | Air cooling |
Maximum heat dissipation[BTU/hour] | 1310 BTU/hour |
Typical heat dissipation[BTU/hour] | 771 BTU/hour (100% throughput, SFP28 high-speed cables on 48 ports and QSFP28 high-speed cables on 6 ports, dual power modules) 891 BTU/hour (100% throughput, short-distance optical modules on all ports, dual power modules) |
Static heat dissipation[BTU/hour] | 570 BTU/hour |
Power supply mode | DC pluggable,AC pluggable,HVDC pluggable |
Rated input voltage[V] | - 600 W AC&240 V DC power module: 100 V AC to 240 V AC, 50/60 Hz; 240 V DC - 1000 W DC power module: –48 V DC to –60 V DC - 1200 W high-voltage DC power module: 240 V DC to 380 V DC |
Input voltage range[V] | - 600 W AC&240 V DC power module: 90 V AC to 290 V AC, 45 Hz to 65 Hz; 190 V DC to 290 V DC - 1000 W DC power module: –38.4 V DC to –72 V DC - 1200 W high-voltage DC power module: 190 V DC to 400 V DC |
Maximum input current[A] | - 600 W AC&240 V DC power module: 8 A (100 V AC to 240 V AC); 4 A (240 V DC) - 1000 W DC power module: 30 A (–48 V DC to –60 V DC) - 1200 W high-voltage DC power module: 8 A |
Rated output power[W] | - 600 W AC&240 V DC power module: 600 W - 1000 W DC power module: 1000 W - 1200 W high-voltage DC power module: 1200 W |
Memory | DRAM: 4 GB |
NOR Flash | 64 MB |
NAND Flash | 4 GB |
USB | Supported |
Console port | RJ45 |
Downlink Service interface | 48*25GE SFP28 (Note: 1. 25GE ports can be configured to work at 10 Gbit/s or 1 Gbit/s. Every four downlink 25GE ports form a group, and can be configured to work at 10 Gbit/s or 1 Gbit/s through the command; 2. 10GE LRM/80KM linear optical modules are not supported; 3. 1 m 25GE copper cables and 1 m/3 m/5 m 10GE copper cables are supported, and auto-negotiation of copper cables is not supported; 4. 25GE copper cables can only be used on stack ports and M-LAG peer-link ports.) |
Uplink Service interface | 6*100GE QSFP28 Note: 1. Each 100GE QSFP28 port can be configured to work at 40 Gbit/s. 2. A 100GE QSFP28 port cannot be split into 4 x 25GE or 4 x 10GE ports. 3. 100GE and 40GE 1/3/5 m copper cables are supported, but auto-negotiation of copper cables is not supported. 100GE and 40GE copper cables can only be used on stack ports and M-LAG peer-link ports. 100G 3/5 m copper cables support only RS FEC. After the non-RS FEC mode is configured, the port enters the error-down state. |
Service port supporting the stack function | 25GE optical ports, and 100GE optical ports |
RTC | Supported |
Switching capacity[bps,bit/s] | For more details, see the datasheet/brochure or contact product sales personnel. |
Redundant fans | The device supports 3+1 backup of fan modules that work in hot standby mode. The system can operate properly for a short period of time after a single fan module fails. You are advised to replace the faulty fan module immediately. |
Redundant power supply | 1+1 backup |
Number of power modules | 2 |
Power supply surge protection | AC: 6 kV in common mode and 6 kV in differential mode DC: 4 kV in common mode and 2 kV in differential mode HVDC: 4 kV in common mode and 2 kV in differential mode |
Types of fans | Pluggable |
Number of fan modules | 4 |
Airflow direction | Front-to-back or back-to-front airflow, depending on the selected fan modules and power modules |
Storage temperature[°C(°F)] | -40°C to +70°C (-40°F to +158°F) |
Long-term operating temperature[°C(°F)] | 0°C to 40°C (32°F to 104°F) at an altitude of 0–1800 m (0–5906 ft.) Note: When the altitude is 1800–5000 m (5096–16404 ft.), the highest operating temperature reduces by 1°C (1.8°F) every time the altitude increases by 220 m (722 ft.). |
Long-term operating relative humidity[RH] | 5% RH to 95% RH, non-condensing |
Long-term operating altitude[m(ft.)] | ≤ 5000 m (16404 ft.) |
MTBF[year] | 47.81 years |
MTTR[hour] | 1.95 hours |
Noise at high temperature (40°C, sound pressure) | - Front-to-back airflow: < 75 dB(A) - Back-to-front airflow: < 74 dB(A) |
Noise at normal temperature (27°C, sound pressure) | - Front-to-back airflow: < 58 dB(A) - Back-to-front airflow: < 57 dB(A) |
Availability | 0.9999962836 |
){kind=link}