| Communication Mode: | Full-Duplex & Half-Duplex |
|---|---|
| Type: | Ethernet Switch |
| Transmission Rate: | 10/100/1000Mbps |
| Customization: |
|---|
| Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier
| Basic Information | |
| Part Number | 02116318 |
| Model | S8700-6 |
| Description | S8700-6 assembly chassis |
| Technical Specifications | |
| Height [mm] | 352.8 mm |
| Depth [mm] | 482.8 mm |
| Wide [mm] | 442.0 mm |
| Chassis height [U] | 8 |
| Weight without packaging | 32.88 (72.49) |
| Maximum power consumption [W] | 1560 W (full configuration, without PoE) |
| Heat dissipation mode | Absorbing cold air into the device |
| Maximum heat dissipation [BTU/h] | 5322.94 |
| Input voltage range [V] | - DC input: -38.4 V DC to -72 V DC or 38.4 V DC to 57.6 V DC - AC input: 90 V AC to 290 V AC; 45 Hz to 65 Hz - High-voltage DC input: 190 V DC to 290 V DC Note: - V600R021C10 and later versions support DC input. - In V600R021C10 and later versions, the 3000 W output capability of AC power modules (2500 W/3000 W AC&240 V DC power modules) can be enabled using a command. |
| Rated input voltage [V] | - DC input: -48 V DC/-60 V DC/48 V DC - AC input: 110 V AC/220 V AC, 50/60 Hz - High-voltage DC input: 240 V DC Note: V600R021C10 and later versions support DC power input. |
| Number of power slots | 6 |
| Number of service board slots | 4 |
| Number of MPU slots | 2 |
| Redundant power supply | - Dual-power input: The N+0 and N+1 modes are supported. The N+1 mode is recommended. - Single-power input: The N+0, N+1, and N+N modes are supported. The N+1 mode is recommended. |
| Redundant MPUs | The control unit and switching unit work in hot standby (1:1) mode. |
| Redundant fans | Fan modules work in hot standby mode. The system can operate properly for a short time after a single fan module fails. You are advised to replace the faulty fan module immediately. |
| Automatic fan speed adjustment | Supported |
| Noise at normal temperature (acoustic power) | - ≤69.0dB(A) @AC 2500 W N+N power supply - ≤ 78.0 dB(A)@AC 2500 W N+1 power supply - ≤ 78.0 dB(A)@AC 2500 W N+0 power supply - ≤ 73.8 dB(A) @DC 2200 W N+1 power supply In N+0 power supply mode, it is recommended that the DC power output load do not exceed 1780 W. Otherwise, the noise may exceed 78 dB(A). Note: - In V600R021C10 and later versions, 2200 W DC power modules are supported. - V600R021C10 and later versions support N+N configuration of AC power modules. - In V600R021C10 and later versions, the 3000 W capability of the AC power module (2500 W/3000 W AC&240 V DC power module) can be enabled using a command. When the power consumption of a single power module exceeds 2500 W, the noise may exceed 72 dB(A) in different power module configurations. |
| Airflow direction | Front-to-back airflow |
| Short-term operating temperature | -5°C to +55°C (23°F to 131°F) at an altitude of -60 m to 1800 m (-197 ft. to 5906 ft.) Note: When the short-term operating temperature ranges from 45°C to 55°C: - When the PAC3KS54-DF (2500 W/3000 W AC&240 V DC power module) is used for power supply, the short-term operating temperature can reach 55°C only when the system is configured to work in N+1 power supply mode (the output power of a single power module is less than 2100 W). - Only optical modules with a transmission distance less than or equal to 10 km can be used. |
| Restriction on the operating temperature variation rate | When the altitude is 1800 m to 5000 m (5905.44 ft. to 16404.00 ft.), the highest operating temperature reduces by 1°C (1.8°F) every time the altitude increases by 220 m (722 ft.). |
| Long-term operating temperature | -5°C to 45°C (23°F to 113°F) at an altitude of -60 m to 1800 m (-197 ft. to 5906 ft.) |
| Storage temperature | -40°C to 70°C (-40°F to 158°F) |
| Long-term operating relative humidity [RH] | 5% to 95%, noncondensing |
| Long-term operating altitude | -60 m to 5000 m (-197 ft. to 16404 ft.) |
| Storage altitude | < 5000 m (16404 ft.) |
| MTBF [year] | 32.04 |
| MTTR [h] | 2 |
| Availability | 0.9999928743 |
| Maximum number of 100GE ports | 2 |
| Maximum number of 40GE ports | 4 |
| Maximum number of 25GE ports | 72 |
| Maximum number of 10GE ports | 208 |
| Maximum number of GE ports | 208 |
| Power supply surge protection | - 2500 W/3000 W AC&240 V DC power module, AC input mode, power port: ±6 kV in common mode and ±6 kV in differential mode; HVDC input mode, power port: ±2 kV in common mode and ±4 kV in differential mode - 2200 W DC power module, DC power port: ±2 kV in common mode, ±6 kV in differential mode Note: V600R021C10 and later versions support 2200 W DC power modules. |
| PoE | Supported |
| Relationship between PoE and system power modules | Shared, not differentiated |
| Maximum PoE output power per slot | 4800 W (2880 W/slot for the current card) |
| Maximum number of PoE ports per slot | 48 |
| Maximum PoE output power [W] | 90 |
| Maximum power output capability (including the system power output and PoE power output) [W] | - Six 2500 W/3000 W AC&240 V DC power modules: 15000 W (220 V AC or 240 V DC input; output power of each power module: 2500 W) - Six 2200 W DC power modules: 13200 W - N 2500 W/3000 W AC&240 V DC power modules and M 2200 W DC power modules: N x 2500 W + M x 2200 W Note: - V600R021C10 and later versions support DC power input. - In V600R021C10 and later versions, the 3000 W output of 2500 W/3000 W AC&240 V DC power modules can be enabled using a command. When the power module works in 3000 W mode, it can be used only at an altitude lower than 2000 m (6562 ft.). In addition, it cannot be used together with other power modules. - When the input voltage of an AC power module is 110 V, the AC power module cannot be used together with other power modules. Otherwise, overcurrent protection may be triggered for the power module. |
Kuanlu Information Technology Co., Ltd.(Kuanlu LTD) is a secondary operator in China, with 10 years of experience in data center operations. It provides services to over 200 data centers and secondary operators, and its end customers include many well-known internet companies such as Tencent and NetEase.
Kuanlu is also a domestic telecommunications equipment and service provider, and a gold medal agent for multiple devices such as Huawei, ZTE, H3C, and Ruijie. It can deliver carrier level network hardware products at lower prices, and core network equipment inventory exceeding $5 million can deliver products within 72 hours.
The core team comes from manufacturers such as Huawei and H3C, with technical staff certified by HCIE, HCNP, and other engineers. Most of them have more than 5 years of work experience and have a 7 * 24 hour fast response ability. They can provide users with planning, debugging, and emergency upgrade services.
The company has its own data transmission room and equipment maintenance factory, with a product database of over 300GB, focusing on data communication, transmission, wireless, server, storage, and security products. With no less than 1 year of after-sales tracking, it can provide users with remote and local installation services to ensure the stable operation of their equipment.
1.How can i get the price?
We usually quote within 24 hours after we get your inquiry (Except weekend and holidays). If you are very urgent to get the price, please email us or contact us in other ways so that we can offer you a quote.
2. Can I buy samples placing orders?
Yes. Please feel free to contact us.
3.What is your lead time?
It depends on the order quantity and the season you place the order. Usually we can ship within 7-15 days for small quantity, and about 30 days for large quantity.
4.What is your payment term?
-T/T, Western Union, Money Gram, and Paypal. This is negotiable.
5.What is the shipping method?
It could be shipped by sea, by air or by express (EMS,UPS,DHL,TNT,FEDEX and ect). Please confirm with us before placing orders.
6.How do you make our business long-term and good relationship?
a. We keep good quality and competitive price to ensure our customers benefit;
b. We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.
WE PROMISE:
1.Quality: All products from HUAWEI and new.
2.Reply on time: Your inquiry related to our products or price will be replied within 24 hours.
3.OEM&ODM: We can help you to design and put your good idea into products.
4.Warranty: 1-years warranty.
5.Technology support: On-site technical support, Telemaintenance, Free call and E-mail technology supports.
6.Training service support: Provide free training service on installation and debugging technology supports.
1.Original Carton Package.
2. As your requirement.
1. 3-7 Working days after received the payment.
2. Shipment: Sea transportation & Air transportation ( DHL / UPS / TNT / FedEx / EMS )
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}