| Communication Mode: | Full-Duplex & Half-Duplex |
|---|---|
| Type: | Ethernet Switch |
| Transmission Rate: | 10/100/1000Mbps |
| Customization: |
|---|
| Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier CE6863E-48S6CQ (02354GCT-002)
| Item | Details |
|---|---|
| Description | CE6863E-48S6CQ switch (48*25GE SFP28, 6*100GE QSFP28, without fan and power modules) |
| Part Number | 02354GCT-002 |
| Model | CE6863E-48S6CQ |
| First supported version | V200R021C10SPC600 |
| Other part numbers |
02354GCW-002 (CE6863E-48S6CQ switch (48*25GE SFP28, 6*100GE QSFP28, 2*AC power modules, 4*fan modules, port-side intake)) 02354GCX-002 (CE6863E-48S6CQ switch (48*25GE SFP28, 6*100GE QSFP28, 2*AC power modules, 4*fan modules, port-side exhaust)) |
| Supported Patch Version | If the switch runs V200R021C00SPC200, install the patch of V200R021SPH020 or a later version. |
| Short Name | CE6863E |
| Slot Type | Slot ID | Slot Direction | Remarks |
|---|---|---|---|
| Power supply slot | - | Horizontal insertion |
The CloudEngine 6800 series switches have two power module slots, in which pluggable power modules can be installed. A chassis can use one or two power modules. In particular, dual power modules provide higher reliability. The CloudEngine 6800 series switches support dual power modules working in 1+1 backup mode. When both power modules are working properly, each power module provides half of the power for the switch. If one power module fails, the other one provides full power for the switch. All power modules are hot swappable. |
| Fan slot | - | Horizontal insertion |
|
| Port | Connector Type | Description | Available Components |
|---|---|---|---|
| 10GE/25GE SFP28 optical port | The connector type of the optical fiber depends on the optical module. |
The 48 10GE/25GE SFP28 optical ports are divided into 12 port groups, with four ports in each group (1-4, 5-8, 9-12, ..., 45-48). · If any port in a port group is configured to work at 1 Gbit/s, 10 Gbit/s, or 25 Gbit/s, the other three ports in the group work at the same speed. · When four ports in a port group work at 25 Gbit/s, they support only 25GE media and will go Down if other types of media are used. When the ports in a port group work at 10 Gbit/s, they support only 10GE media and will go Down if other types of media are used. When the ports in a port group work at 1 Gbit/s, they support only GE media and will go Down if other types of media are used.
|
GE eSFP optical modules GE SFP copper modules 10GE SFP+ optical modules 25GE SFP28 optical modules SFP+ to SFP+ AOC cable SFP+ to SFP+ high-speed cable SFP28 to SFP28 AOC cable SFP28 to SFP28 high-speed cable
NOTE:
1. When a GE copper module is installed on a 10GE optical port, the port can only work at 1000 Mbit/s. 2. 10GE optical ports do not support OSXD22N00 or LE2MXSC80FF0 optical modules. 3. When the port works at 25 Gbit/s, 1 m SFP28 high-speed cables are supported, and auto-negotiation of copper cables is not supported. The SFP28 high-speed cables can only be used on stack ports and M-LAG peer-link ports. 4. When a 25GE port is configured to work at 10 Gbit/s, the port supports 1 m, 3 m, and 5 m 10G SFP+ high-speed cables. |
| 40GE/100GE QSFP28 optical port | The connector type of the optical fiber depends on the optical module. |
A 40GE/100GE QSFP28 Ethernet optical port sends and receives service traffic at 40 Gbit/s or 100 Gbit/s.
|
40GE QSFP+ optical modules 100GE QSFP28 optical modules QSFP+ to QSFP+ AOC cable QSFP+ to QSFP+ AOC cable QSFP+ to QSFP+ high-speed cable QSFP+ to QSFP+ high-speed cable QSFP28 to QSFP28 AOC cable QSFP28 to QSFP28 AOC cable QSFP28 to QSFP28 high-speed cable QSFP28 to QSFP28 high-speed cable
NOTE:
1. Ports to which QSFP+ to QSFP+ or QSFP28 to QSFP28 high-speed cables are connected cannot be split into 4x25GE and 4x10GE ports. Auto-negotiation of copper cables is not supported. These cables can only be used on stack ports and M-LAG peer-link ports. 2. When a 100GE port has a QSFP28 high-speed cable installed and works at the rate of 100 Gbit/s, 1 m, 3 m, and 5 m QSFP28 high-speed cables are supported. The 100G 3/5 m copper cable supports only RS FEC. After the non-RS FEC mode is configured, the port enters the error-down state. 3. If a 100GE port is configured to work at the rate of 40 Gbit/s, the port supports 1 m, 3 m, and 5 m 40G QSFP+ high-speed cables. |
| Console port | RJ45 |
The console port is connected to a console for on-site configuration.
|
Console cable |
| ETH management port | RJ45 |
The ETH management port (RJ45) is used to connect the device to a configuration terminal or network management workstation to configure the device locally or remotely.
|
Category-5 or higher category Ethernet cable |
| USB port | USB | The USB port can have a USB flash drive connected to back up and upload logs and system software, and supports USB-based deployment. |
Supports USB 2.0 flash drives. |
| Item | Specification |
|---|---|
| Dimensions with packaging (H x W x D) [mm (in.)] | 175 mm x 650 mm x 550 mm (6.89 in. x 25.59 in. x 21.65 in.) |
| Dimensions without packaging (H x W x D) [mm (in.)] |
|
| Weight without packaging [kg (lb)] | 5.7 kg (12.57 lb) (excluding optical modules, power modules, and fan modules) |
| Weight without packaging (full configuration) [kg (lb)] | 7.8 kg (17.2 lb) (including AC power modules and fan modules but excluding optical modules. If the device supports multiple models of modules, the heaviest modules are used for the measurement.) |
| Weight with packaging [kg (lb)] | 8.95 kg |
| Weight with packaging (full configuration) [kg (lb)] | 11.05 kg (24.36 lb) |
| Installation Type | Cabinet installation |
| CPU | Quad-core, 1.4 GHz |
| Memory | DRAM: 4 GB |
| NOR Flash | 64 MB |
| NAND Flash | 4 GB |
| USB | Supported |
| Power supply mode |
|
| Console port | RJ45 |
| Downlink Service interface | 48*25GE SFP28 (Note: 1. 25GE ports can be used as 10GE and GE ports. Every four downlink 25GE ports form one group and can be configured to work at 10 Gbit/s or 1 Gbit/s using commands. 2. 10GE LRM/80KM linear optical modules are not supported. 3. 25GE 1 m copper cables and 10GE 1 m/3 m/5 m copper cables are supported, and auto-negotiation of copper cables is not supported. 4. 25GE copper cables can only be used on stack interfaces and M-LAG peer-link interfaces.) |
| Uplink Service interface |
6*100GE QSFP28
NOTE:
1. Each 100GE QSFP28 port can be configured to work at 40 Gbit/s. 2. A 100GE QSFP28 port cannot be split into 4 x 25GE or 4 x 10GE ports. 3. 100GE and 40GE 1/3/5 m copper cables are supported, but auto-negotiation of copper cables is not supported. 100GE and 40GE copper cables can only be used on stack ports and M-LAG peer-link ports. 100G 3/5 m copper cables support only RS FEC. After the non-RS FEC mode is configured, the port enters the error-down state. |
| Service port supporting the stack function | 25GE optical ports and 100GE optical ports |
| RTC | Supported |
| Typical power consumption [W] |
226 W (100% throughput, SFP28 high-speed cables on 48 ports and QSFP28 high-speed cables on 6 ports, dual power modules) 261 W (100% throughput, short-distance optical modules on all ports, dual power modules) |
| Typical heat dissipation [BTU/hour] |
771 BTU/hr (100% throughput, SFP28 high-speed cables on 48 ports and QSFP28 high-speed cables on 6 ports, dual power modules) 891 BTU/hr (100% throughput, short-distance optical modules on all ports, dual power modules) |
| Static power consumption [W] | 167 W |
| Static heat dissipation [BTU/hour] | 570 BTU/hour |
| Maximum power consumption [W] | 384 W |
| Maximum heat dissipation | 1310 BTU/hour |
| Number of power modules | 2 |
| Redundant power supply | 1+1 backup |
| Rated input voltage [V] |
Rated AC input voltage range: 100 V AC to 240 V AC; 50/60 Hz Rated -48 V DC input voltage range: -48 V DC to -60 V DC Rated input voltage range for 600 W AC & 240 V DC: 240 V DC Rated input voltage range for 1200 W HVDC: 240 V DC to 380 V DC |
| Input voltage range [V] |
Maximum AC input voltage range: 90 V AC to 290 V AC; 45 Hz to 65 Hz Maximum -48 V DC input voltage range: -38.4 V DC to -72 V DC Maximum input voltage range for 600 W AC & 240 V DC: 190 V DC to 290 V DC Maximum input voltage range for 1200 W HVDC: 190 V DC to 400 V DC |
| Maximum input current [A] |
600 W AC&240 V DC power module (PAC600S12 series): · 8 A (100 V AC to 240 V DC) · 4 A (240 V DC) 1000 W DC power module (PDC1000S12 series): 30 A (-48 V DC to -60 V DC) 1200 W high-voltage DC power module (PHD1K2S12 series): 8 A |
| Rated output power [W] |
600 W (AC&240 V HVDC) 1000 W (-48 V DC) 1200 W (380 V HVDC) |
| Certification |
· Complies with safety standards. · Complies with EMC standards. · Complies with environmental protection standards. |
| Power supply surge protection [kV] |
AC: 6 kV in common mode and 6 kV in differential mode DC: 4 kV in common mode and 2 kV in differential mode HVDC: 4 kV in common mode and 2 kV in differential mode |
| Types of fans | Pluggable |
| Number of fans | 4 |
| Redundant fans | Supports 3+1 backup. Fan modules work in hot backup mode. If a fan module fails, the system can still work properly for a short period of time. However, you are advised to replace the faulty fan module immediately. |
| Heat dissipation mode | Air cooling |
| Airflow direction | Front-to-rear or rear-to-front, depending on the selected fan modules and power modules |
| Availability | 0.9999962836 |
| MTBF [year] | 47.81 years |
| MTTR [hour] | 1.95 hours |
| Noise at normal temperature (27°C, sound pressure) [dB(A)] |
|
| Noise at high temperature (40°C, sound pressure) [dB(A)] |
|
| Long-term operating altitude [m (ft.)] | ≤ 5000 m (16404 ft.) |
| Long-term operating relative humidity [RH] | 5% RH to 95% RH, non-condensing |
| Long-term operating temperature [°C (°F)] |
0°C to 40°C (32°F to 104°F) at an altitude of 0-1800 m (0-5906 ft.)
NOTE:
When the altitude is 1800-5000 m (5096-16404 ft.), the highest operating temperature reduces by 1°C (1.8°F) every time the altitude increases by 220 m (722 ft.). |
| Storage altitude [m (ft.)] | ≤ 5000 m (16404 ft.) |
| Storage relative humidity [RH] | 5% RH to 95% RH, non-condensing |
| Storage temperature [°C (°F)] | -40°C to +70°C (-40°F to +158°F) |
1.Original Carton Package.
2. As your requirement.
1. 3-7 Working days after received the payment.
2. Shipment: Sea transportation & Air transportation ( DHL / UPS / TNT / FedEx / EMS )
1.Quality: All products from HUAWEI and new.
2.Reply on time: Your inquiry related to our products or price will be replied within 24 hours.
3.OEM&ODM: We can help you to design and put your good idea into products.
4.Warranty: 1-years warranty.
5.Technology support: On-site technical support, Telemaintenance, Free call and E-mail technology supports.
6.Training service support: Provide free training service on installation and debugging technology supports.
Kuanlu Information Technology Co., Ltd.(Kuanlu LTD) is a secondary operator in China, with 10 years of experience in data center operations. It provides services to over 200 data centers and secondary operators, and its end customers include many well-known internet companies such as Tencent and Wangsu.
Kuanlu is also a domestic telecommunications equipment and service provider, and a gold medal agent for multiple devices such as Huawei, ZTE, H3C, and Ruijie. It can deliver carrier level network hardware products at lower prices, and core network equipment inventory exceeding $5 million can deliver products within 72 hours.
The core team comes from manufacturers such as Huawei and H3C, with technical staff certified by HCIE, HCNP, and other engineers. Most of them have more than 5 years of work experience and have a 7 * 24 hour fast response ability. They can provide users with planning, debugging, and emergency upgrade services.
The company has its own data transmission room and equipment maintenance factory, with a product database of over 300GB, focusing on data communication, transmission, wireless, server, storage, and security products. With no less than 1 year of after-sales tracking, it can provide users with remote and local installation services to ensure the stable operation of their equipment.
1.How can i get the price?
We usually quote within 24 hours after we get your inquiry (Except weekend and holidays). If you are very urgent to get the price, please email us or contact us in other ways so that we can offer you a quote.
2. Can I buy samples placing orders?
Yes. Please feel free to contact us.
3.What is your lead time?
It depends on the order quantity and the season you place the order. Usually we can ship within 7-15 days for small quantity, and about 30 days for large quantity.
4.What is yourpayment term?
-T/T, Western Union, Money Gram, and Paypal. This is negotiable.
5.What is the shipping method?
It could be shipped by sea, by air or by express (EMS,UPS,DHL,TNT,FEDEX and ect). Please confirm with us before placing orders.
6.How do you make our business long-term and good relationship?
a. We keep good quality and competitive price to ensure our customers benefit;
b. We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}